Fast Track Super Tuning
The run-in stand we use for Fast Track Super Tuning simulates
the conditions of an engine installed in a vehicle. The Fast
Track computer helps super-tune the engine on the Fast Track
run-in stand. The engine is tuned as if it were actually
sitting in a vehicle.
- First we pre-set all the settings after the engine
is installed on the Fast Track run-in stand. Then the
engine is started, to break in the performance cam and
seat the rings for proper break-in procedures. After
30 minutes of running, the engine is turned off and
allowed to sit and cool down for one hour.
- Next we start the engine a second time. Now all the settings
are checked, including jetting of the carburetor and
checking the timing. The oxygen sensors are checked
for proper operation using the Fast Track computer readout.
This is a real time reading of your engine results.
(You can see this being done on our video clip.) The
computer gives exhaust readings from both sides, to
show how rich or lean the engine is running. Once we
are satisfied with our jetting of the carburetor,
settings and timing, then we re-start the engine to
confirm all readings. This may be done several times
to ensure everything is correct.
- The engine is started again for a red line break-in.
This time we run the engine while we check all adjustments
to confirm proper tolerances. We run the engine up to
its red line break-in, for example: 4,000 rpm. This
way we get a full parameter reading on the engine. Then
we will adjust valves, re-torque the heads, re-torque
the intake, and check all cylinders, restarting the
engine as needed to confirm the results.
- We send you a computer reading from our Fast Track computer.
The DVD video you receive is a real time video, taken
when your engine was actually on the Fast Track run-in
stand, when the mufflers were bolted on and the oxygen
sensors hooked up. You will also receive still photos
on the same disk. This DVD can be viewed on your computer.
- As a last step, we take a video with the mufflers unbolted
from the headers ("open headers"). We create
a real time video for you to see and hear your engine
with open headers. (This always sounds awesome!) This
is included on the DVD video disk mentioned above. Included
in the items we send you is a packet of information
and specifics regarding your engine.
- Pricing for Fast Track Super Tuning includes:
the run-in stand $695.00.
Two oil changes performed during
the Super Tuning: $149.50 - This includes the oil, zinc
additive, and fuel.
(Ask about our promotional Fast Track discount pricing!)
Big Block run in $795.00.
There are a lot of extras included in the Fast Track Super
Tuning package. It's a worry free option, because all you
have to do is drop the engine in, plug and play! You receive
a real "READY-TO-RUN ENGINE."
on your speakers to hear the engine in this sample video,
and double click the video to see it in a full screen
This is a real time video clip of an engine running
through the super tuning procedures on our Fast Track
computer. In this video, the exhaust is bolted on.
This video is the same engine after Super Tuning... This time with "open headers" -- mufflers have been unbolted and removed.
Please note that these videos are of a sample engine; not the engine you are considering or may have already ordered.
Videos of YOUR engine will be sent to you on a DVD disk.
Copyright Notice: these videos are copyrighted (©) and
are the sole property of PhoenixEngine.com. They may not
be copied or re-distributed without express permission